Looking to buy hbs 2 by KASTO in the United States? At PAOParts LLC, we offer a wide range of industrial products, including hbs 2. Whether you're located in Houston, Austin, San Antonio, Fort Worth, Dallas, Los Angeles, San Diego, Salt Lake City, Kansas City, Seattle, Miami, Detroit, New York City, Chicago, or Denver, we can supply the KASTO products you need.
hbs 2
If you need more information about hbs 2, please contact us for details.
As an independent supplier, we provide genuine KASTO products at competitive prices. Our efficient distribution network ensures prompt delivery across the USA. We source our products from trusted channels, so you can be confident in the authenticity and quality of the items you purchase from us.
Ready to purchase or need more details about hbs 2? Reach out to us today. Call +1 417 261 6001 or email sales@paoparts.com. Our expert team is here to assist you in finding the perfect solutions for your industrial needs.
PAOParts LLC is an independent supplier of KASTO products and is not affiliated with or authorized by the official distributor. All trademarks and brand names are the property of their respective owners.
For customized pricing and availability, please fill out ourcontact formor give us a call. We are dedicated to providing solutions that align with your specific requirements.
How can I access hbs 2 catalogs, user manuals, technical documents, and PDFs?
Do you provide technical support for hbs 2?
While we do not offer direct technical support, we can assist you in contacting the manufacturer to ensure you receive the support you need.
| Manufacturer | KASTO |
|---|---|
| Country | |
| Part number | hbs 2 |
| Inner Code | 4968185 |
| Cut areas: cutting range 90┬░ round 250 mm cutting area 90┬░ flat (W x H) 280 x 180 mm cutting area 90┬░ square 230 x 230 mm cutting range + 45┬░ around 180 mm cutting area + 45┬░ flat (W x H) 170 x 200 mm cutting area + 45┬░ flat (W x H) 155 x 235 mm cutting range + 45┬░ square 170 x 170 mm Measurements and weights: Length 1.435 mm Width 564 mm Height, upper part lowered 949 mm Height, upper part 1,261 mm in maximum position Material support height 500 mm Material support height with rotatable Foundation frame (accessories) 555 mm Features: Total input power 2.0 kW saw motor, power 0.8/1.0 kW Average cutting speed 16/32 m/min Strokes 62/125 m/min saw blade dimensions: 450 x 40 x 2,0 mm Varnish: light grey RAL 7035, textured paint anthracite grey RAL 7016, textured paint pure orange RAL 2004, textured paint Fully hydraulic feed control, closed oil hydraulics, 2 cutting speeds thanks to pole-reversible motor, stepless cutting pressure regulation, return lift, rapid speed of the saw bracket independent of the cutting pressure, extremely large stirrups guide, miter cuts can be adjusted from 0 ÔÇö 45┬░ according to the scale, pendulum vise for surgery Timalen saw blade utilization, coolant device (flow rate 16 l/min), push button Control for on/off functions and automatic shut-off. Scope of delivery 2 hexagonal pin wrenches 1 KASTO saw blade 1 operating manual in accordance with EU Machinery Directive and EN 82079 energy supply Line voltage in accordance with EN 60204 400 V three-phase current (-10%, +6%) 24 V DC control voltage The connected value in kVA will be reported after the scope of delivery has been determined. Other voltages upon request at an additional cost. Line frequency 50 Hz (-1%, +1%; short term -2%, +2%) Network type TN network in accordance with IEC 364/VDE 0100 The energy is supplied from the grid to the control cabinets, including preliminary Construction on site. The position of the control cabinet is based on the layout. safeguard versus indirect touch overcurrent protection device (zeroing). The operator's network supply (size and characteristics of the selected main system insulation and the total impedance of PE and outer conductor in the supply line to the machine schine) must be designed in such a way that the allowable shutdown time in the event of a fault is not is exceeded. The use of a residual current protection device in the grid supply is not allowed casual. Compressed air requirement The total compressed air requirement is (if necessary) in the technical data sheet of the corresponding machine or specified in the corresponding offer items. The installation of compressed air lines, including maintenance Unit is carried out on site up to the point of use. climate Temperature: Ambient temperature 0 ┬░C to +40 ┬░C, for servers or clients +10 ┬░C to +32 ┬░C. Humidity: class 3K3 in accordance with DIN/EN 60721-3-3, table 1, point m, no condensation Material quality/cutting accuracy With perfect conditions and tools, in particular a material curvature < 2 mm/m, the cutting distance is Softening for normally machinable steels within ┬▒0.1 mm per 100 mm cutting height. In case of geometric objections- Free material is a section length accuracy for individual bars and section lengths over 6 mm in accordance with ISO 2768-1 degree of accuracy finely achievable. When using odd, twisted or burred Starting material, the specified accuracies can only be achieved to a limited extent. The section length hole- ranz is valid for machines with automatic material feed. The material to be sawn must have a maximum residual magnetism of H<8 A/cm. varnishing The following components always remain in KASTO standard paint, even with special paint: ÔÇó ÔÇó Control cabinet ÔÇó ÔÇó Control panel ÔÇó ÔÇó Terminal boxes ÔÇó ÔÇó Motors, gears, drives | |
| default.weight_all_offices | 215 |
|---|
