iL115s Pump by IPP LOBE
Get a quote
The IPP LOBE iL115s is a hygienic lobe pump featuring a displacement volume of 0.55 l/rev and a differential pressure capability of up to 15 bar. Designed with FDA-compliant Viton static O-rings, non-galling alloy trilobe rotors, and 1.4404 stainless steel product-wetted surfaces with a roughness of Ra ~ 0.8 μm, it is built for sanitary fluid handling. The pump includes double mechanical seals (TC/TC-TC/TC) suitable for pressurized or unpressurized flushing, paired with DN50 DIN11851 horizontal suction and discharge connections. Driven by a 4.0 kW SEW helical gear motor via a coupling on a 1.4301 stainless steel base frame, this unit incorporates NSF1 compliant lubricants, EG1935/2004 compliance, and features an integrated flushing connection piping setup with ball valves.
More IPP LOBE part numbers
Frequently Asked Questions(FAQ):
Where can I buy iL115s by IPP LOBE in the USA?
You can purchase iL115s by IPP LOBE from PAOParts LLC. We serve customers across the USA, offering competitive prices and reliable service.
What is the price of the iL115s?
Price and availability are quoted per request. Send the part number and the quantity you need through our quote request form and you will receive a written offer by e-mail.
Who is the official distributor or seller of IPP LOBE in the United States?
While we are not the official distributor or seller of IPP LOBE in the United States, we source our products from reliable channels and offer you original IPP LOBE equipment at competitive prices.
How can I access iL115s catalogs, user manuals, technical documents, and PDFs?
Ask for them in your quote request. We attach the datasheet, catalogue page or manual we hold for iL115s to our written reply.
Do you provide technical support for iL115s?
While we do not offer direct technical support, we can assist you in contacting the manufacturer to ensure you receive the support you need.
Characteristics
| Manufacturer | IPP LOBE |
|---|---|
| Part number | iL115s |
| Inner Code | 1802857 |
Technical specification
| Product type | IPP LOBE iL115s Pump |
|---|---|
| Housing / Rotors | Stainless steel 1.4404, product-wetted surfaces Ra ~ 0.8 μm, other surfaces Ra ~ 1.2 μm |
| Shafts | Stainless steel 1.4462 |
| Bearing housing | Steel, chemically nickel-plated |
| Gearbox housing | Stainless steel 1.4301, untreated exterior |
| Rotor profile | Trilobe (0;0), Non-Galling-Alloy |
| Gearbox lubricants | Viscosity class ISO VG 68, NSF1 |
| Shaft seal | Double mechanical seal TC/TC-TC/TC for unpressurized or pressurized flushing |
| Sealing materials | Viton-FDA O-rings for product-wetted static seals |
| Suction side connection | DN50 DIN11851, horizontal |
| Discharge side connection | DN50 DIN11851, horizontal |
| Shaft position | Bottom |
| Displacement volume | 0,55 l/rev. |
| Max differential pressure | 15 bar |
| Drive | Helical gear motor SEW R47DRN112M4/TF, 4,0 kW, n=338 min-1, 113 Nm, 50Hz, 3ph, 230/400V +/-10%, IP55, ISO Class F, 3 PTC thermistors for VFD operation, RAL9006, oil according to NSF1, IE3 |
| Base frame | Type C made of stainless steel 1.4301, Omega profile, ground with 240 grit |