42CM06C hybrid stepper motor by Leadshine
Get a quote
The Leadshine 42CM06C is a 2-phase hybrid stepper motor built with a NEMA 17 flange size of 42.0 by 42.0 mm and a motor length of 47.0 mm (with a +/- 1 mm length tolerance). Featuring a 1.8-degree step angle, this unit delivers a holding torque of 0.6 Nm. The motor is equipped with a 5.0 mm diameter shaft that has a 24.0 mm length, alongside an integrated 300.0 mm lead wire length for connectivity. Designed for precision motion control applications, it operates with a rated current of 2.5 A per phase, a phase resistance of 0.85 Ohms, and a phase inductance of 1.6 mH. The rotor inertia is specified at 90.0 gcm2, and the entire assembly is rated to an IP40 protection class.
More Leadshine part numbers
Frequently Asked Questions(FAQ):
Where can I buy 42CM06C by Leadshine in the USA?
You can purchase 42CM06C by Leadshine from PAOParts LLC. We serve customers across the USA, offering competitive prices and reliable service.
What is the price of the 42CM06C?
Price and availability are quoted per request. Send the part number and the quantity you need through our quote request form and you will receive a written offer by e-mail.
Who is the official distributor or seller of Leadshine in the United States?
While we are not the official distributor or seller of Leadshine in the United States, we source our products from reliable channels and offer you original Leadshine equipment at competitive prices.
How can I access 42CM06C catalogs, user manuals, technical documents, and PDFs?
Ask for them in your quote request. We attach the datasheet, catalogue page or manual we hold for 42CM06C to our written reply.
Do you provide technical support for 42CM06C?
While we do not offer direct technical support, we can assist you in contacting the manufacturer to ensure you receive the support you need.
Characteristics
| Manufacturer | Leadshine |
|---|---|
| Part number | 42CM06C |
| Inner Code | 5075480 |
Technical specification
| Product type | 42CM06C hybrid stepper motor |
|---|---|
| Motor type | 17 Flange NEMA |
| Flange size x | 42.0 mm |
| Flange size y | 42.0 mm |
| Shaft Dia | 5.0 mm |
| Shaft length | 24.0 mm |
| Motor length | 47.0 mm |
| Length tolerance | +/- 1 mm |
| No. of phases | 2 |
| Step angle | 1.8 degree |
| Rated current per phase | 2.5 A |
| Resistance per phase | 0.85 Ohm |
| Inductance per phase | 1.6 mH |
| Holding torque | 0.6 Nm |
| Rotor inertia | 90.0 gcm2 |
| Protection class | IP40 |
| Lead wires length | 300.0 mm |