PH 75 S Adsorptionstrockner by Pneumatech
Get a quote
The Pneumatech PH 75 S is a cold-regenerated adsorption dryer engineered to deliver a pressure dew point of -40 degrees Celsius. Operating with a nominal capacity of 2.1 m3/min at a 7 bar inlet pressure and a 35 degree Celsius inlet temperature, this unit features time-controlled regeneration cycles with an average regeneration air requirement of 18.5 percent. The system functions within an inlet pressure range of 4.0 to 14.0 bar and ambient conditions from 2 to 45 degrees Celsius. It includes pre-filtration (TF 3 - C) and post-filtration (TF 3 - S) stages, equipped with an automatic float drain valve. The C-stage handles oil aerosols and particles, reducing maximum oil concentration from 10 mg/m3 to a maximum residual oil content of 0.01 mg/m3. The S-stage provides particle separation down to 0.1 micrometer at 99.81 percent efficiency. The dryer measures 620 x 401 x 1115 mm, weighs 88 kg, and features a G 1/2 inch internal thread air connection.
Frequently Asked Questions(FAQ):
Where can I buy PH 75 S by Pneumatech in the USA?
You can purchase PH 75 S by Pneumatech from PAOParts LLC. We serve customers across the USA, offering competitive prices and reliable service.
What is the price of the PH 75 S?
Price and availability are quoted per request. Send the part number and the quantity you need through our quote request form and you will receive a written offer by e-mail.
Who is the official distributor or seller of Pneumatech in the United States?
While we are not the official distributor or seller of Pneumatech in the United States, we source our products from reliable channels and offer you original Pneumatech equipment at competitive prices.
How can I access PH 75 S catalogs, user manuals, technical documents, and PDFs?
Ask for them in your quote request. We attach the datasheet, catalogue page or manual we hold for PH 75 S to our written reply.
Do you provide technical support for PH 75 S?
While we do not offer direct technical support, we can assist you in contacting the manufacturer to ensure you receive the support you need.
Characteristics
| Manufacturer | Pneumatech |
|---|---|
| Part number | PH 75 S |
| Inner Code | 3401774 |
Technical specification
| Product type | PH 75 S Adsorption Dryer |
|---|---|
| Drucktaupunkt | -40 °C |
| Prinzip | kaltregenerierend |
| Steuerung | Standardsteuerung |
| Volumenstrom | 2,1 m³/min |
| Eintrittstemperatur | 35 °C |
| Regenerationsluftbedarf | 18,5 % |
| Umgebungsbedingungen min. / max. | 2 / 45 °C |
| Druckabfall über Trockner | 0,035 bar |
| Eintrittsdruck min. / max. | 4,0 / 14,0 bar |
| Spannung / Frequenz | 230 / 50 V / Hz |
| Abmessungen (L x B x H) | 620 x 401 x 1115 mm |
| Gewicht | 88 kg |
| Druckluftanschluss | G 1/2 inch ig |
| Vorfilter | TF 3 – C |
| Nachfilter | TF 3 - S |
| Ablass | Automatisches Schwimmer-Ablassventil |
| Nennkapazität | 2,1 m³/min |
| Oelkonzentration Einlass max. | 10 mg/m³ |
| Max. Restölgehalt | 0,01 mg/m³ |
| Druckverlust nass | 240 mbar |
| Partikelabscheidegrad 0,1μm | 99,81 % |
| Partikelabscheidegrad 1μm | 99,97 % |
| Partikelabscheidegrad 0.01μm | 99,87 % |
| Druckverlust trocken | 120 mbar |
| Elementwechsel | 4000 h (oder jährlich) |
| max. Betriebsdruck | 16 bar |